...
This document contains the requirements and functional design for a software kernel that computes the safety assessments of Liquefaction and Breach flowassessment of the failure mode flow slide.
Requirements
The functional requirements for D-FlowSlide are:
...
- A Global check according to the global assessment rules given in Toetsproces zettingsvloeiing; A Toetsmethode zettingsvloeiing (versie 2, 22 februari 2016) ; A Global assessment is solely based on geometric characteristics of under water slope and levee,
- A Detailed check according to the probabilistic assessment method described in Toetsproces zettingsvloeiing; With the Toetsmethode zettingsvloeiing (versie 2, 22 februari 2016); In the detailed check also soil properties are taken into account.
- An Advanced check, using two is usingthe two advanced programs of Deltares:
- Advanced check for static liquefaction, using the original program Sliq2D
- Advanced check for breach flow, using the original program HMBreach.
...
The definition of the symbols used in this Background section can be found in the Symbols list.
Assessment scheme D-Flow Slide
The figure below shows the assessment scheme for D-Flow Slide, which largely corresponds with the steps in the safety assessment in WBI2017.
Figure 1: Assessment scheme for D-Flow Slide