...
Figure 3. Manipulation of the AST mapmapwindow
Project set up
First, search for the area where you want to make the project after accepting both the disclaimer and copyrights, and starting the project.
...
Once a project area is drawn, a NEXT button will appear to continue with the project area setup.
Press "NEXT" to continue and fill out all the parameters of the project area. Brief explanations on the options can be shown by pressing the i, information button. Notice that you will not be able to go to the next step until you have filled out all the parameters.
...
Once a measure has been selected and added to the map, the measure settings panel appears. In this panel the depth and inflow area can be given in. In case of a line measure a width needs to be given in and in case of a point measure a radius needs to be given in. Default values are provided for all settings. Additional information on the measure settings can be found by pressing the i information buttons.
Figure 14. Parameter ranges that can be chosen for a measure
...
Once the element is added to the map the panel on the left will show an option CHOOSE MEASURE to select a measure for the area.
Figure 14. CHOOSE MEASURE to assign a measure to the drawn object.
By selecting this option a list similar as shown above is presented. The list may vary based on whether an area, line or point has been added. A measure can be assigned by pressing CHOOSE MEASURE.
...
Additional map layers to be shown, can be selected by pressing the layer selection button:
When this button is selected, several layers can be chosen to be shown in the map, similar to the layers provided below.
...
Figure 19. Menu to save and export projects
Additional map layers can be added by the user by pressing the Add layer button. These maplayers should located on a GIS-server and is accessible through either WMS, WMTS or arcrest. A more elaborate description can be found here.
...