...
Imports time series data with observed daily rainfall from the KNMI that is delivered to the Dutch waterboards. The files are in CSV format with file extension (*.dat) the next definition in the file:
<location ID>, <location name>, <X in km>, <Y in km>, <date in YYYYMMDD>, <value in 0.1 mm>. See the example file and the KNMI site.
Notice that the rainfall is measured at 08:00 UT (=GMT), but this time is not written in the file. Therefore the time will be read bij the FEWS import reader as 00:00 hours. The rainfall is supplied as an accumulative time series over the last 24 hours. This requires the time step in FEWS to be configured as
...
More information on the KNMI rainfall data sets can be found in the following document Maand Neerslag Overzicht.on the KNMI website
Configuration (Example)
A complete import module configuration consists of an ID Mapping file and a Import Module Instance file. To convert the rainfall in a proper unit (from 0.1 mm/day to mm/day for example) it is also required to configure a Unit Conversion file.
...
| Code Block | ||||||
|---|---|---|---|---|---|---|
| ||||||
<?xml version="1.0" encoding="UTF-8"?>
<timeSeriesImportRun ......">
<import>
<!--IRIS (24h)-->
<general>
<importType>KNMIIRIS</importType>
<folder>$IMPORT_FOLDER_KNMI_IRIS$</folder>
<failedFolder>$IMPORT_FAILED_FOLDER_KNMI_IRIS$</failedFolder>
<backupFolder>$IMPORT_BACKUP_FOLDER_KNMI_IRIS$</backupFolder>
<idMapId>IdImportIRIS</idMapId>
<unitConversionsId>ImportKNMIUnits</unitConversionsId>
<!--data is supplied at 08:00 GMT, but in the file this time is not mentioned, so read as 00:00 hrs.
so the time zone offset (to GMT) should be -8 hrs-->
<importTimeZone>
<timeZoneOffset>-08:00</timeZoneOffset>
</importTimeZone>
<dataFeedId>KNMI-IRIS</dataFeedId>
</general>
<timeSeriesSet>
<moduleInstanceId>ImportKNMI</moduleInstanceId>
<valueType>scalar</valueType>
<parameterId>P.meting</parameterId>
<locationSetId>KNMI-IRIS</locationSetId>
<timeSeriesType>external historical</timeSeriesType>
<timeStep unit="day" multiplier="1" timeZone="GMT-8"/>
<readWriteMode>add originals</readWriteMode>
<synchLevel>1</synchLevel>
</timeSeriesSet>
<!--to let the import module know that the KNMI rainfall is an accumulative timeseries in 0.1 mm/d
that should be converted to for example mm/d-->
<externUnit parameterId="P.meting" unit="0.1 mm/d"/>
</import>
</timeSeriesImportRun>
|
...
| Code Block | ||||||
|---|---|---|---|---|---|---|
| ||||||
<idMap version="1.1" ..............>
<map internalParameter="P.meting" internalLocation="KNMI_827" externalParameter="827" externalLocation="827"/>
<map internalParameter="P.meting" internalLocation="KNMI_831" externalParameter="831" externalLocation="831"/>
<map internalParameter="P.meting" internalLocation="KNMI_896" externalParameter="896" externalLocation="896"/>
<map internalParameter="P.meting" internalLocation="KNMI_902" externalParameter="902" externalLocation="902"/>
.....
</idMap>
|
...
| Code Block | ||||||
|---|---|---|---|---|---|---|
| ||||||
<?xml version="1.0" encoding="UTF-8"?>
<unitConversions ...................>
<unitConversion>
<inputUnitType>0.1 mm/d</inputUnitType>
<outputUnitType>mm/d</outputUnitType>
<multiplier>0.1</multiplier>
<incrementer>0</incrementer>
</unitConversion> ........
........
</unitConversions>
|
...
| Code Block | ||||||
|---|---|---|---|---|---|---|
| ||||||
10,HOLLUM , 172, 605,20071028, 0
11,WEST TERSCHELLING , 144, 598,20071028, 0
16,PETTEN , 106, 531,20071028, 0
17,DEN BURG , 116, 563,20071028, 1
18,NES (AMELAND) , 181, 607,20071028, 0
19,DE COCKSDORP , 121, 575,20071028, 2
21,CALLANTSOOG , 109, 541,20071028, 0
26,FORMERUM , 149, 601,20071028, 1
64,SNEEK , 172, 561,20071028, 0
65,MAKKUM , 156, 564,20071028, 1
67,DOKKUM , 195, 593,20071028, 0
69,APPELSCHA , 219, 553,20071028, 0
73,DRACHTEN , 203, 570,20071028, 0
|
...