...
- Topology (RegionConfigFiles)
It lists all the peak height stations for which the correlation display should be shown. Only the forecast stations (mostly the downstream locations) should be listed. When a station for which a peak heights relation exist is listed in the forecast tree, the correlation display is automatically activated. - DisplayGroups (RegionConfigFiles)
The DisplayGroup file contains a list with related locations for each Peakheights station as defined in Topology, with reference to a defined display (plotId). - TravelTimes configuration (TravelTimesFiles)
A station can sometimes appear as forecast location (DS), sometimes as support (US) location. One forecast location may be correlated with multiple support locations. All support parameters for a single forecast location must have the same parameters. It is important to check that a locationId has the same name attached at all occurrences in the TravelTimeSets configuration file. Having multiple names for the same locationId will result in an error in the Delft-FEWS GUI. - CorrelationEventSets (CorrelationEventSetsFiles)
Definition of the events used in establishing a correlation between locations - CorrelationDisplay (DisplayConfigFiles) - this wiki page
Links the correct CorreltationEvents and PeakheightsTravelTimes configuration files and set the type of matching to be used to link events (i.e. SelectionType). When the SelectionType is set the “combined” for the forecast location the behavior will be as follows:- Events are first matched on “eventId” and if these are missing, matching takes additionally place based on “travel time” (OR relation).
- Events that have a mismatch based on travel time, but do have an EventId match will be part of the selection.
- Events that have a match based on travel time, but do not have an EventId match will be part of the selection.
The selection in the GUI can be refined using the filter options in the display.
| Anchor | ||||
|---|---|---|---|---|
|
| Anchor | ||||
|---|---|---|---|---|
|
...