User manual based on Tutorial (bm-1-1)

Main Window: The Cross Section of the problem

All input windows can be found as a dropdown list at Project in the Menu bar. 

By Default only the Global and Detailed models are used. Depending on the selected models, 3 charts (2 global and 1 detailed) or 4,5 charts (Liquefaction and/or Breaching) will be showned

In this tutorial  we start with the three standard models

Start by filling the Soil table for the Global and Detailed models.

The description of all parameters can be found on the page Input parameters.

Add a surface line with the charateristic point, as shown in this table. They have to be in this order!

Make a soilprofile by using de soillayers form the Soil Table.

Add the additional parameters for the models

The detailed model needs some extra parameters.

When all parameters are inputed, you can start the calculation.

If one of the parameters are out of range, a validation  message will be given in the table window

When no errors are found, the results are presented.

In this case both the global as the detailed models fails

Global result

The detailed results can be found in two different windows.

the advanced models.

Please check your input data of the advanced carefully and  discuss your results with @Dick Mastbergen or @Geeralt van den Ham (Deltares)

Because the Global and Advanced models fails, we have to use the advanced models for a more a more detailed analysis.

 Select the Advanced  models for Liqeufaction (Sliq2D) and Breach Flow (HMBreach) at Project Info
   

Check the addional soil table parameters for liqufaction

Check the addional soil table parameters for breaching

Restart the calculation 

The models  Liquefaction and Breach flow are als selected. 5 Charts will be showned.

In this case the advanced models indicates no failuren of the bank (both are green)

Download the file of this tutorial.