The user has to add some additional parameters for the models.
3.1 General parameters
3.1.1 Water
Name in English | Name in Dutch | Description | Symbol | Unit | Default |
---|---|---|---|---|---|
Water level | Niveau water | The water level. | Zwater | m | 0.00 |
Unit weight of water | Soortelijk gewicht water | The unit weight of water. | γw | kN/m3 | 9.81 |
3.1.1 Revetment
Name in English | Name in Dutch | Description | Symbol | Unit | Default + decimals + (range)
|
---|---|---|---|---|---|
Revetment length dike top | Bekledingslengte vanaf buitenteen dijk | Horizontal projection of the length of the revetment, starting at dike toe at river side. | Mbestorting | m | 0.00 (0-10000) |
RX start bottom revetment | RX start vanaf geulbodem, onderste gedeelte van vooroever | Start co-ordinate of the revetment at the bottom of the channel. | Xstart;bestorting;onder | m | 0.00 (-10000-10000) |
Bottom revetment length | Bekledingslengte onderste gedeelte van vooroever | Horizontal projection of the length of the revetment at the bottom of the channel. | Mbestorting;onder | m | 0.00 (0-10000) |
3.1.3 Foreland
Name in English | Name in Dutch | Description | Default |
---|---|---|---|
Artificial and non-densified sandy foreland? | Is er sprake van een kunstmatig onder water aangebrachte en niet verdichte zandige of siltige vooroever? |
| No |
3.1.4 Soil
Name in English | Name in Dutch | Description | Default |
---|---|---|---|
State parameter Psi 5m | State parameter Psi 5m | This parameter describes the state of the soil and is used in the Global check (step 5) and the Detailed check. A state parameter < -0,05 means that liquefaction is unlikely, whereas a state parameter > -0,05 indicates some liquefaction potential. | 0.0000 (-10-10) |
First of all, general parameters.
NOTE: The state parameter Ψ5m entered here is used in step 5 of the Global check and in the Detailed check.
The description of these parameters can be found on the page Input parameters
Secondly, the detailed model needs some extra parameters.
The probabilistic parameters are fixed, Only the Mean "Area ratio" can be changed (white box)
The description of these parameters can be found on the page Input parameters
.