Perform a calculation and the results will be displayed
When all parameters have been specified, you can start the calculation by using the blue arrow-head or press the key F9.
If one of the parameters is out of range or missing, a validation message will be given in the table window "Validation messages"
When no errors are found, the results are presented in the window "Results"
In this version there is no extended report of the results.
7.1 Overall results
In this case both the global check fails and detailed check passes. However, since a very fine sand was selected, the detailed check is formally not applicable. For this reason the overall result is not "pass".
7.2 Global results
Use the tab Global results to see the results. The method itself has been described the background part of this wiki manual
7.3 Detailed results
Use the tab Detailed results to see the results. The Detailed check has been described in detail the background part of this wiki manual
The Global assesment fails. It means the surface line does not meet the criteria of a save slope and liquefactio or breaching may occur. The Detailed assesment must give a definite answer when also the soil profile is included in the analysis.
In our case it seems to be ok.
However when the detailed assessment method also not passed, the advanced models can be used for further analysis of the problem. In the folowing paragraph the input data of the advanced models are explained