Conventions
Example http://www.adaptavist.com/display/Builder/Background+Settings
- Centre images, same size
- Gray background for actions?
- Links?
- Browse?
Introduction
This tutorial shows how to use the Hydro Network functionality within in Delftshell. This tutorial is subdivided in:
- Working with Hydro Network. In this part you learn to create and adjust a Hydro Network.
- Import of a network. In this part you learn how to import existing networks.
Working with Hydro Network
Create a new Hydro Network
You have to start with a new project.
First you have to add an empty network to your project:
- Go to the project explorer;
- Rightclick on project1;
- Select new data;
- Select network (down in the menu);(NB Network helemaal onderaan, Mwell weg?)
In the same way you have to add a map: - Go to the project explorer;
- Rightclick on project1;
- Select new data;
- Select map.
In the map navigator (heet nog maps) you can add a layer to the map. - Select add layer;
- Browse to .... river network.shp;
- Use the buttons "zoom to extend" to view the layer.
Now you can add the network to the map:
- Select the network from the project explorer;
- Drag the network on the map (central view).
Now you see in map a treeview with the network as subset op the map and the network editor is active. You can start editing now!
You can create branches in two ways to draw a network:
- Create new Branch This option is used to draw very accurate. You can add curvepoints on exact locations.
- Create new Branch (Auto): With this option you can draw a Network fluently. Curvepoints are added automatically.
- Select Create new Branch(Point and Click)
- Draw one of the branches by clicking;
- Stop with a doubleclick.
Now you can try some network editing tools:
*Move Feature (smart): when you drag a node the network moves proportionally, when you drag a line, the network moves integrally;
*Move Feature: when you drag a node this individual node moves;
*Insert curve points : You can add curve point and move them to make the location of your network more accurate;
*Delete network (gives error) : You have to draw your network again;
The endpoints of the branch are automatically assigned as boundaries(see map legend). Adding another branch to a boundary automatically changes a boundary to a normal node.
- Select Create new Branch(Auto);
- Connect the other branch to the first branch;
Now you can finish your network
- Again select Create new Branch(Auto);
- Draw a new branch downstream from the confluence.
Working with Branches
Working with Cross-sections
Add Cross section
-Schematical
-geometry based
In network view bekijken
-double click
-adjust in table view
history aanzetten=> import
Working with Structures
=> niet volledig
=> tekenen, compound structures
Import a network
from Sobek
=> Import data
from vector layer (shp, gdb)
=> network view aanzetten
Add map
Drag network to map
add layer (polyline) (let op kleine selectie, Paul)
menu
network
import branch
inzoomen uitzoomen (refresh, Paul)