Merging the DisplayGroups configuration files requires some more changes in the spreadsheets. One has to merge the sheet 'DisplayGroups_plotdef' as well as the sheet 'DisplayGroups_folders'.
step 1: Merge sheet 'DisplayGroups_plotdef'
- Open the 'Region_Displays.xls' spreadheet and go to the 'DisplayGroups_plotdef' sheet which contains the plot definitions for Model1. The plot definitions form the first part of the DisplayGroups.xml file (section plot).
- The 'DisplayGroups_plotdef' sheet should contain all the scenarios and parameters used in either of the models.
- most of the plot definitions can be used for both models, except the plot definitions with plot id 'plot_H_ref_all' (on top of you spreadsheet). Here you have to have a separate plot definition for each model. Copy the section with the plot defintion 'plot_H_ref_all' from spreadsheet of model 2 under the section of the plot definition 'plot_H_ref_all' in the "Region_Displays.xls' sheet. To distinguish between the plot definition of the two models add the model's abbreviation as a postfix to the plot id 'plot_H_ref(all)'. That means you have one plot definition named 'plot_H_ref(all)_Model1' used for plots of model 1 and one plot definition named 'plot_H_ref(all)_Model2' used for plots of model 2.
Note: The plot id for these plots have to be changed accordingly in the sheet 'DisplayGroups_folders'. Here you refer to the plot definitions in the sheet 'DisplayGroups_plotdef'
- Check if all other plot definitions from the model 2 spreadsheet 'DisplayGroups_plotdef' are represented in the model 1 spreadsheet 'DisplayGroups_plotdef'. Copy all plot definitions for the display groups of Model2 which are not yet represented in the plot definitions of Model1 from the spreadsheet 'Model2_Displays.xls' from the sheet 'DisplayGroups_plotdef' to the sheet 'DisplayGroups" in the 'Region_Displays.xls' spreadheet.
Note: If you merge two models with different time steps (e.g. time step model 1 is daysOfMonth="01" and time step model 2 is daysOfMonth="01 16") you can't use the same plot definitions for both models. In this case you have to take the same approach as for the 'pot_H_ref(all)' plot definitions (see above). All plot defintions have to be copied from the sheet for model 2 to the plot defintions of the merged spreadsheet ('Region_Displays.xls') and the model abbrevation have to be added to each plot defintion as a post-fix. At the end you will have one spreadsheet 'DisplayGroups_plotdef' which contains all plot defintions of model 1 (each plot id contains the model abbreviation of model 1 as a post-fix), followed by all model plot defintions of model 2 (each plot id contains the model abbreviation of model 2 as a post-fix)
- Save the spreadsheet 'Region_Displays.xls'
example file (Anglian displays, meged models EO, NWN and YNN all use the same time step)
step 2: Merge sheet 'DisplayGroups_folders'
- Open the 'Region_Displays.xls' spreadheet and go to the 'DisplayGroups_folders' sheet which contains the folder structure of the display groups for Model1. The folder structure is forms the second part of the DisplayGroups.xml file (section displayGroup).
- Copy the content of the sheet 'DisplayGroups_folders' from the sheet for model 2, to the end of the same sheet in the merged spreadsheet ('Region_Displays.xls'). The order of the elements in the list should not be changed.
- Make sure that the names of the plot id's match the names of the plot id's in the sheet 'DisplayGroups_plotdef).
- change 'plot_H_ref_all' of model 1 to 'plot_H_ref_all_MODEL1' (where MODEL1 is the model abbreviation for model 1)
- change 'plot_H_ref_all' of model 2 to 'plot_H_ref_all_MODEL2' (where MODEL2 is the model abbreviation for model 2)
- if necessary add the model abbreviation as post-fix to every plot id name (in case the model time steps are different and one has to use a separate plot definition for each model, see above)
- save the spreadsheet 'Region_Displays.xls'
example file (Anglian displays, meged models EO, NWN and YNN all use the same time step)