XBeach
XBeach is a two-dimensional model for wave propagation, long waves and mean flow, sediment transport and morphological changes of the nearshore area, beaches, dunes and backbarrier during storms.
Example configuration
Export activities
The first steps in the general adapter run are the netcdf and run file export activities, the exported files will be a netcdf file (swanxbinput.nc) containing Swan golf spectra over time and a netcdf file (1xbinput.nc) containing water level over time. The exported run file will contain properties that can be used by the pre adapter. For example:
- TIDE_VARIABLE: name of netcdf variable containing water level
- PARAM_TUNITS: meaning of the time values in XBeach input and output files. For example "seconds since 2001-01-01"
- PARAM_OUTPUTFORMAT: XBeach parameter specifying the output format. Has to be "netcdf" for FEWS to import
- PARAM_TSTOP: XBeach parameter specifying end of XBeach run: for example "36000" which in this case means after 10 hours
Properties starting with "PARAM_" will be passed literally to XBeach without "PARAM_" (and in lower case)
<exportActivities> <exportNetcdfActivity> <exportFile>swanxbinput.nc</exportFile> <timeSeriesSets> <timeSeriesSet> <moduleInstanceId>Run_XBeach</moduleInstanceId> <valueType>scalar</valueType> <parameterId>EnDens</parameterId> <domainParameterId>AFREQ</domainParameterId> <domainParameterId>NDIR</domainParameterId> <locationId>Dummy</locationId> <timeSeriesType>external historical</timeSeriesType> <timeStep unit="hour"/> <relativeViewPeriod unit="hour" start="-24" end="0"/> <readWriteMode>add originals</readWriteMode> <synchLevel>1</synchLevel> </timeSeriesSet> </timeSeriesSets> </exportNetcdfActivity> <exportNetcdfActivity> <exportFile>1xbinput.nc</exportFile> <timeSeriesSets> <timeSeriesSet> <moduleInstanceId>Run_XBeach</moduleInstanceId> <valueType>scalar</valueType> <parameterId>H_mean</parameterId> <locationId>Dummy</locationId> <timeSeriesType>external historical</timeSeriesType> <timeStep unit="minute" multiplier="10"/> <relativeViewPeriod unit="hour" start="-24" end="0"/> <readWriteMode>add originals</readWriteMode> </timeSeriesSet> </timeSeriesSets> </exportNetcdfActivity> <exportRunFileActivity> <description>This pi run file is passes as argument to XBeachPreAdapter</description> <exportFile>pi_run\pi-run.xml</exportFile> <properties> <description>Specific configuration required for MyPreAdapter and MyPostAdapter</description> <string key="TIDE_VARIABLE" value="H_mean"/> <string key="PARAM_TUNITS" value="seconds since 2001-01-01"/> <string key="PARAM_OUTPUTFORMAT" value="netcdf"/> <string key="PARAM_TSTOP" value="36000"/> </properties> </exportRunFileActivity> </exportActivities>
Execute activities
The next steps are the execute activities. The first will be the pre adapter. This program will read the pi-run.xml input file and use the properties for instructions on which directory and files should be used to convert to the correct XBeach input format.
<executeActivities> <executeActivity> <command> <className>com.deltares.fews.xbeachadapters.preadapter.XBeachPreAdapter</className> <binDir>adapter\bin</binDir> </command> <arguments> <argument>pi_run\pi-run.xml</argument> </arguments> <timeOut>99999999</timeOut> </executeActivity> <executeActivity> <command> <executable>runxb.bat</executable> </command> <timeOut>99999999</timeOut> </executeActivity> </executeActivities>
Golf spectrum conversion
In this example "swanxbinput.nc" will be used to write the golf spectra into the following format:
- waves.txt referencing to golf spectrum files and a time of how long these should be used in each calculation step
FILELIST 3600.0 1.0 egx.loct001.sp2 3600.0 1.0 egx.loct002.sp2 3600.0 1.0 egx.loct003.sp2 3600.0 1.0 egx.loct004.sp2 3600.0 1.0 egx.loct005.sp2 3600.0 1.0 egx.loct006.sp2 3600.0 1.0 egx.loct007.sp2 3600.0 1.0 egx.loct008.sp2 3600.0 1.0 egx.loct009.sp2 3600.0 1.0 egx.loct010.sp2
- egx.loct001.sp2 containing a golf spectrum
SWAN 1 Swan standard spectral file, version $ Data exported by FEWS for SWAN $ Project: ; run number: TIME time-dependent data 1 time coding option LONLAT locations in spherical coordinates 1 number of locations 4.6019540 52.6194688 AFREQ 1/s 25 number of frequencies 0.0500 0.0566 0.0642 ... 0.7791 0.8827 1.0000 NDIR degrees 36 number of directions 265.0000 255.0000 245.0000 ... -65.0000 -75.0000 -85.0000 QUANT 1 number of quantities in table EnDens id m unit -0.9900E+02 exception value 20010101.000000 date and time FACTOR 0.0011500214 0 0 0 0 0 0 0 0 0 0 ... 0 0 0 0 0 0 0 0 0 0 0 0 0 ... 0 0 0 0 0 0 0 0 0 0 0 0 0 ... 0 0 0 1 1 0 0 0 0 0 0 0 0 ... 0 0 1 40 27 9 3 3 3 2 0 0 0 ... 2 9 28 610 294 70 17 24 31 17 0 0 0 ... 67 303 626 4916 1621 268 57 119 193 145 23 0 1 ... 1780 5295 7229 13782 3341 415 94 287 659 803 340 0 6 ... 14433 28039 27099 14186 2446 257 68 290 982 1874 1407 5 3 ... 52381 62127 39577 10369 1638 231 37 90 431 1241 1598 227 0 ... 99999 80353 37089 8225 1923 361 54 17 70 324 770 448 0 ... 77305 54223 24535 6742 1962 381 88 21 6 30 143 211 0 ... 42814 28100 15442 5744 2480 622 147 34 5 1 8 30 0 ... 27283 16631 9808 4448 2618 1011 228 41 6 0 0 2 2 ... 15103 9139 6001 2853 2150 977 217 34 5 1 0 0 0 ... 8682 5250 3507 1818 1588 752 160 20 4 1 0 0 0 ... 4838 2895 2116 1064 927 597 168 23 3 0 0 0 0 ... 2374 1383 1151 517 534 423 142 23 2 0 0 0 0 ... 1182 789 561 243 299 202 87 17 1 0 0 0 0 ... 756 329 262 137 112 87 51 12 1 0 0 0 0 ... 243 98 120 86 40 34 18 5 1 0 0 0 0 ... 137 117 142 55 21 8 4 2 0 0 0 0 0 ... 137 123 87 24 13 3 1 0 0 0 0 0 0 ... 83 74 62 6 7 1 0 0 0 0 0 0 0 ... 58 27 16 6 3 0 0 0 0 0 0 0 0 ... 39 20 10
Water level conversion
In this example "1xbinput.nc" will be used to write the time dependent water levels to a file named "tide.txt". The first column specifies the time (meaning defined in "PARAM_TUNITS") and the second column water level. For now the adapter only supports the water level as a single boundary condition but XBeach has to possibility to also use 2 or 4 resulting in 1 or 3 extra columns.
0.0000000e+000 -2.2000000e-002 6.0000000e+002 2.2000000e-002 1.2000000e+003 6.4999998e-002 1.8000000e+003 1.0800000e-001 2.4000000e+003 1.5200000e-001 3.0000000e+003 1.9400001e-001 3.6000000e+003 2.3700000e-001 4.2000000e+003 2.7900001e-001 4.8000000e+003 3.1999999e-001 5.4000000e+003 3.6100000e-001 6.0000000e+003 4.0099999e-001 6.6000000e+003 4.4100001e-001 7.2000000e+003 4.7900000e-001 7.8000000e+003 5.1700002e-001 8.4000000e+003 5.5400002e-001 9.0000000e+003 5.8999997e-001 9.6000000e+003 6.2400001e-001 1.0200000e+004 6.5700001e-001 1.0800000e+004 6.9000000e-001 1.1400000e+004 7.2000003e-001 1.2000000e+004 7.5000000e-001 1.2600000e+004 7.7800000e-001 1.3200000e+004 8.0500001e-001 1.3800000e+004 8.2999998e-001 1.4400000e+004 8.5299999e-001 1.5000000e+004 8.7500000e-001 1.5600000e+004 8.9499998e-001 1.6200000e+004 9.1399997e-001 1.6800000e+004 9.3000001e-001 1.7400000e+004 9.4599998e-001 1.8000000e+004 9.5899999e-001
Parameter conversion
The pre adapter will also convert all run file string properties starting with "PARAM_" to XBeach parameters in "params.txt". Example: params.txt.
It reads an existing "params.txt" and searches for a line starting with the specified parameter and replaces the whole line with "parameter = value" or adds a new line in the same format when the parameter was not present yet.
---------------------------------------------------- Grid input nx = 154 ny = 70 xfile = x.grd yfile = y.grd xori = 101627.84 yori = 513562.63 depfile = egmondxbeach.dep ---------------------------------------------------- Numerics input CFL = 0.8 eps = 0.01 ---------------------------------------------------- Time input tstart = 0. tstop = 36000 ---------------------------------------------------- General constants rho = 1025 g = 9.81 ---------------------------------------------------- Boundary condition options zs0file = tide.txt tideloc = 1 ---------------------------------------------------- Wave calculation options bcfile = waves.txt ---------------------------------------------------- Flow calculation options nuh = 0.1 nuhfac = 1.0 ---------------------------------------------------- Sediment transport calculation options facua = 0.10 D50 = 0.0002 ---------------------------------------------------- Morphological calculation options morfac = 10 morstart = 3600 ---------------------------------------------------- Output options outputformat = netcdf nglobalvar = 3 tunits = seconds since 2001-01-01
Executing model run
The next activity will be executing the XBeach model run. So far this is done by a .bat file to be able to run the xbeach.exe in a other directory containing the input files. It would be preferable to change this in such a way that the .bat file will not be needed.
<executeActivity> <command> <executable>runxb.bat</executable> </command> <timeOut>99999999</timeOut> </executeActivity>
Importing Xbeach output
The last part of the general adapter run is importing the XBeach output. In the case xboutput.nc contains all parameter, output and grid information of the run. This can be visualized in FEWS after defining the needed parameters, location and grid. How to do this can be found here: XBeach FEWS setup
<importActivities> <importPiNetcdfActivity> <importFile>xboutput.nc</importFile> <timeSeriesSets> <timeSeriesSet> <moduleInstanceId>Run_XBeach</moduleInstanceId> <valueType>grid</valueType> <parameterId>H_max</parameterId> <locationId>Dummy</locationId> <timeSeriesType>external historical</timeSeriesType> <timeStep unit="hour"/> <readWriteMode>add originals</readWriteMode> </timeSeriesSet> </timeSeriesSets> </importPiNetcdfActivity> </importActivities>