• Created by Unknown User (schelle@wldelft.nl), last modified on 06-11-2007

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

Summary

This howto describes how to configure a preferred equation of a correlation plot (using the correlationdisplay). it describes how to adjust the CorrelationDisplay config file to select a default for a specific correlation.

Description

The files defining what is shown in the correlation display are stored in the DisplayConfigFiles directory. For each correlation a number of elements must be configured:

  • inputTimeSerieInfo: Historic time series sets information.
    Parameter id is required for calculating correlation. The other variables are required for running the forecast hydrograph.
  • eventSetsDescriptorId: Correlation event sets descriptor ID
  • travelTimesDescriptorId: Travel times descriptor ID
  • eventSelectionType: Selection type: event id selection or travel time selection.

A (new) optional element has been added which allows to set a preferred equation-type for the selected correlation: defaultEquation. This elements has to attributes: equationType (required) and polynomalOrder (optional). This element should be the last element of a CorrelationDisplay config file.

The following options are available for the equationType attribute:

  • polynomial
  • simple_linear
  • multiple_linear
  • exponential_divide
  • exponential_multiply
  • power
  • logarithmic
  • hyperbolic

Configuration Steps

  • Open an existing configuration file. In xmlspy grid view it may look like this:


In text view it will look like this:

<?xml version="1.0" encoding="UTF-8"?>
<!--NFFS Thames region-->
<correlationDisplay xmlns="http://www.wldelft.nl/fews" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.wldelft.nl/fews http://fews.wldelft.nl/schemas/version1.0/correlationDisplay.xsd" version="1.1">
	<inputTimeSerieInfo>
		<moduleInstanceId>ImportTelemetry</moduleInstanceId>
		<parameterId>H.obs</parameterId>
		<timeSeriesType>external historical</timeSeriesType>
		<timeStep unit="minute" multiplier="15" divider="1"/>
		<relativeViewPeriod unit="day" end="2" start="-4"/>
		<readWriteMode>add originals</readWriteMode>
	</inputTimeSerieInfo>
	<eventSetsDescriptorId>NE_Ash_(Herts)_Events</eventSetsDescriptorId>
	<travelTimesDescriptorId>NE_Ash_(Herts)_TravelTimes</travelTimesDescriptorId>
	<eventSelectionType>traveltime</eventSelectionType>
	<outputTimeSerieInfo>
		<moduleInstanceId>ImportTelemetry</moduleInstanceId>
		<parameterId>H.simulated</parameterId>
		<timeSeriesType>simulated forecasting</timeSeriesType>
		<timeStep unit="minute" multiplier="15" divider="1"/>
		<relativeViewPeriod unit="day" start="-4" end="2"/>
		<readWriteMode>add originals</readWriteMode>
	</outputTimeSerieInfo>
	<correlationDisplayOptions>
		<scatterplotOptions>
			<preferredColor>red</preferredColor>
			<markerStyle>circle</markerStyle>
			<markerSize>8</markerSize>
		</scatterplotOptions>
		<equationOptions>
			<lineStyle>solid</lineStyle>
			<markerStyle>none</markerStyle>
		</equationOptions>
	</correlationDisplayOptions>
</correlationDisplay>
  • Now add the following to the end of the file (before the final </correlationDisplay> element): <defaultEquation equationType="simple_linear"/>. In xmlspy grid view it will now look like this:
    <?xml version="1.0" encoding="UTF-8"?>
<!--NFFS Thames region-->
<correlationDisplay xmlns="http://www.wldelft.nl/fews" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.wldelft.nl/fews http://fews.wldelft.nl/schemas/version1.0/correlationDisplay.xsd" version="1.1">
	<inputTimeSerieInfo>
		<moduleInstanceId>ImportTelemetry</moduleInstanceId>
		<parameterId>H.obs</parameterId>
		<timeSeriesType>external historical</timeSeriesType>
		<timeStep unit="minute" multiplier="15" divider="1"/>
		<relativeViewPeriod unit="day" end="2" start="-4"/>
		<readWriteMode>add originals</readWriteMode>
	</inputTimeSerieInfo>
	<eventSetsDescriptorId>NE_Ash_(Herts)_Events</eventSetsDescriptorId>
	<travelTimesDescriptorId>NE_Ash_(Herts)_TravelTimes</travelTimesDescriptorId>
	<eventSelectionType>traveltime</eventSelectionType>
	<outputTimeSerieInfo>
		<moduleInstanceId>ImportTelemetry</moduleInstanceId>
		<parameterId>H.simulated</parameterId>
		<timeSeriesType>simulated forecasting</timeSeriesType>
		<timeStep unit="minute" multiplier="15" divider="1"/>
		<relativeViewPeriod unit="day" start="-4" end="2"/>
		<readWriteMode>add originals</readWriteMode>
	</outputTimeSerieInfo>
	<correlationDisplayOptions>
		<scatterplotOptions>
			<preferredColor>red</preferredColor>
			<markerStyle>circle</markerStyle>
			<markerSize>8</markerSize>
		</scatterplotOptions>
		<equationOptions>
			<lineStyle>solid</lineStyle>
			<markerStyle>none</markerStyle>
		</equationOptions>
	</correlationDisplayOptions>
	<defaultEquation equationType="simple_linear"/>
</correlationDisplay>
  • Done: the display will now take this default instead of the normal one.
  • No labels

Disclaimer