User Guide
Introduction
This guide describes how a test can be set up using the STREAM Concept and can be carried out using the STREAM Library.
Overview
Step |
Description |
---|---|
A Testdefinition describes the procedure of a test. This is an XML document that can be created using the Testdefiner. |
|
Choose a Testdefinition and create an empty test. |
|
Enter the data required in the setup phase, as general project and test information and coordinate systems, sensor locations and sensor calibrations. |
|
Enter the data required in the measurement phase, meter readings. |
|
Perform calculations on measurement data. |
|
Collect measurement and analysis data and present them. |
|
Store the results. |
Demo STREAM Library
An example of these steps (except the first and last), can be found in ExecuteVelocityTest.m
in subfolder 'Demo'.
Debugging this demo gives insight in the different functions of the STREAM Library.
Scenarios
Scenario |
Desciption |
---|---|
|
|
|
Miscellaneous
Step |
Description |
---|---|
Installing the software on a system. |
|
Some variables can be set to a default value. |
|
Most companies report their data within a specified frame. |
|
For a type of test or a group of tests a plot layout can be created in which the data can be plot very easily during the test. |
|
Transducers are placed on a certain location, relative to a coordinate system. |
|
Transducer readings can be converted to physical values by defined Calibrations. |